Wavelength dispersive X-Ray fluorescence analyzer for sulfur and chlorine in liquids quantification.
SPECTROSCAN CLSW
SPECTROSCAN CLSW is a reliable and accurate WDXRF analyzer of sulfur and chlorine in liquids. It provides quick determination of sulfur and chlorine weight content with Limit of Detection as low as 0.3 ppm for sulfur and 0.2 ppm for chlorine.
SPECTROSCAN CLSW fully complies with international standards for sulfur and chlorine analysis by WDXRF technique.
Advanced design, intuitive menu and extended set of CRMs and consumables in starter pack makes easy the work even for a non-professional analyst.
|
SULFUR AND CHLORINE QUANTIFICATION ANALYTICAL PERFORMANCE |
||
|
Elements |
Chlorine, 17Cl |
Sulfur, 16S |
|
Limits of Detection (LOD) |
0.2 |
0.3 |
|
Dynamic range |
0.2 ppm – 1.0 % |
0.3 ppm – 5.0 % |
|
Measurement principle |
Wavelength dispersive X-Ray fluorescence WDXRF |
|
|
Sulfur and chlorine analytical lines selection |
Crystal diffraction |
|
|
Analyzing crystal |
Doubly-curved pyrolytic graphite (C, 002) |
|
|
Sample compartment environment |
Ambient air |
|
|
Optical chamber environment |
Vacuum |
|
|
No Helium blowdown needed |
||
|
Detector |
Sealed proportional counter |
|
|
Measurement time |
10 – 999 seconds Typical time |
|
|
TECHNICAL SPECIFICATION |
|
|
Sample changer |
Automatic lateral loading for 3 sample cups |
|
Sample cups, diameter, volume |
∅32 mm, V 8 cm3 |
|
∅32 mm, V 8 cm3, ventilated |
|
|
X-ray tube capacity |
less 200 W |
|
Interface |
display, thermo printer |
|
Dimensions and weight (not more) |
530х480х340 mm, 40 kg– spectrometer |
|
330х230х380 mm, 9 kg – vacuumpump |
|
|
Power supply |
220 V, ~ 50 Hz, 750 W |
Due to the original design no He blowdown is required, providing LOD as low as 0.2 ppm for CI and 0.3 ppm for S
- Simple in operation;
- Desk top instrument;
- The sample data and analysis results are shown in display and printed out by inbuilt printer;
- Special ventilated cups are developed for volatile samples;
- 3-position sample automatic changer makes analysis of sample replicateseasy.
- Error due to water and air bulbs excluded;
- Contamination of the inner parts of the analyzer is excluded;
- Additional errors due to contamination of the additional protection film is excluded;
- Sample loading unit is easily cleaned.
- Sample preparation;
- Put in the number or name of the sample from inbuilt key-board;
- Fill in two sample cups with the sample;
- Put in the samples into the analyzer and start measurements.
SPECTROSCAN CLSW provides determination of chlorine and sulfur weight content in all types of liquids with Limits of Detection as low as 0.2 ppm for chlorine and 0.3 ppm for sulfur.
SPECTROSCAN CLSW fully complies with international standards for chlorine and sulfur analysis by WDXRF technique.
ТЕЛЕФОН ДЛЯ ЗАКАЗА РАСХОДНЫХ МАТЕРИАЛОВ
Телефон: +7 (812) 324-15-92
WhatsApp / Telegram / Viber: +7 (901) 304-44-44
Емейл: service@spectronxray.ru